|
Hisson Plastic Machinery Company
|
Automatic Hydraulic PET Preform Injection Molding Machine With Several Languages
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
Automatic Hyd
Automatic Hydraulic PET Preform Injection Molding Machine With Several Languages
Quick Detail:
HI-P228 PET Preform Injection Molding Machine is special for PET perform injection molding, clamping force 228tons, real shot weight 800g.
Machine main components adopt world famous brand, e.g.:
• Controller:TECHMATION (TAIWAN),
• Low voltage contactor: SCHNEIDER(FRANCE),
• Low voltage air switch: SCHNEIDER(FRANCE),
• Proportional Valve: Dofluid HNC(TAIWAN)
• Oil pump: VICKERS(USA)
• Directional Valve: VICKERS(USA)
• Induction travel switch: OMORON (JAPAN)
• Inductor potentiometer: FORT(USA)
Description:
HI-P28 PET Preform Injection Molding Machine adopted special prolonged screw, three R/D of screw, 21:1 / 23:1 / 25:1, are available, this machine is used to produce PET performs with weight 15g-500g, neck size 15mm to 120mm.
HI-P228 PET Preform Injection Molding Machine is the type of fully-automatic machine, being provided with high efficiency, high reliability, high speed, low noise, low power consumption and other advantages..
Applications:
Available mold cavities on HI-P228 PET Preform Injection Molding Machine:
For PET perform 15g-20g, 15mm-20mm, mold cavity can be: 8-Cavities, 12-Cavities, 16-Cavities, 24-Cavities, 32-Cavities,
For PET perform 16g-48g, 28mm PCO, 25mm/30mm, mold cavity can be: 8-Cavities, 16-Cavities, 24-Cavities, 32-Cavities,
For PET perform 50g-500g, 60mm-120mm, mold cavity can be: 2-Cavities, 4-Cavities, 6-Cavities, 8-Cavities, 12-Cavities,
Specifications:
HI-P228 Technical Parameters
|
HI-P228 |
Parameters (Special design for PET) |
||
|
TECHNICAL PARAMETER TABLE |
Unit |
||
|
INJECTION |
SCREW DIAMETER |
mm |
60 |
|
SCREW L/D RATIO |
L/D |
25 |
|
|
SHOT VOLUME(THEORETICAL) |
cm3 |
780 |
|
|
INJECTION WEIGHT(PET) |
g |
826 |
|
|
INJECTION PRESSURE |
Mpa |
147 |
|
|
INJECTION RATE |
g/s |
273 |
|
|
PLASTICIZING CAPACITY |
g/s |
49 |
|
|
SCREW SPEED |
rpm |
0-180 |
|
|
CLAMPING |
CLAMP FORCE |
Kn |
|
